Welcome to Suryansu Industrial Engineering Pvt. Ltd.
Sand blasting and Painting services
- A stream of sand projected by compressed air (as for engraving, cutting, or cleaning glass or stone
- Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants
- There are several variants of the process, using various media; some are highly abrasive, whereas others are milder. The most abrasive are shot blasting (with metal shot) and sandblasting (with sand). Moderately abrasive variants include glass bead blasting (with glass beads) and media blasting with ground-up plastic stock or walnut shells and corncobs. A mild version is sodablasting (with baking soda). In addition, there are alternatives that are barely abrasive or nonabrasive, such as ice blasting and dry-ice blasting.
- Painting is the practice of applying paint, pigment, color or other medium to a solid surface (support base). The medium is commonly applied to the base with a brush, but other implements, such as knives, sponges, and airbrushes, can be used.
- Painting media
- Hot wax or encaustic
- Spray paint
- Water miscible oil paint
- Digital painting
- Clean the surface
- Remove loose and peeling paint
- Remove rust
- Repair small holes and dents
- Prime the surface
- Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow
- To retain the steel intact with its full initial strength.
- To provide the surface a more pleasing appearance.
- To increase the life of any suitable organic finishing system applied over it.
- To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere.
Get in touch
Regd. & Corporate Office
Ground floor, NGV/117, Plot no-7662/10292,
Canal road, Kandasar, Nalco Nagar, Angul,
Pin-759145, Odisha, India.
Service Support:- +918917317192
24×7 Customer Support:- +919437598205
CIN No:- U74200OR2014PTC018118